PVC plywood, fiber,borad,HDF White Emulsion factory supplier

Use scope: PVC & plywood ,PVC & fiberboard,PVC & composite board,PVC & HDF

Material:polyvinyl acetate VAC-BA-MMA terpolymer emulison..excellent and belong to water-borne molecules product.

Feature:

1)There’s no benzene, methyl alcohol and other
poison. Under the ROHS.

2)Suitable for each season, ice-free at
-23-30°C.

3)Long using period with mini-capsule
technique, and exposure as long time.

4)Curing strength in short time and stick
smoothly with advanced material.

5)Couldn’t break as long time and no need to
repair with age resister Nan
composite.

Usage:

1. Clean the surface, keep away from dirt,
oil stain and dust;

2. Smear adhesive on the surface evenly once,
the dense material should smear in first;

3. When the adhesive become less sticky
(about 5 or 20 minutes after smear), press the material inside-out to exhaust
the air and keep strong stickiness

4. Keep the material in dry and cool place
and curing more than 24 hours.

Note:

A. Don’t using in the sun. When using at the
out-door material, should fill silicone sealant in the interface to against the
adhesive break;

B. Punch on the Aluminum composite panel,
fire barrier board, and other dense material, to prevent the air stay
inside;

C. Keep the adhesive in closed place, to
prevent the adhesive volatile and out of function;

D. Don’t mixed with formaldehyde, benzene,
toluene, xylene, toluene diisocyanate, acetone, hydrogen
halides.

E. Fire products, need to keep dry and
closed. 12 months guarantee period.

Technical:

1) Surface: buff and translucent, without
solid glue and scrap of machine.

2) Density: 0.80-0.85g/cm³

3) volatile matter: 64±1%

4) Strength: ≥1.1MPa

5) initial viscosity: ≥1.2KN/m

6) Viscosity:
280-360mPa·S

Package: 1KG OR 20KG IN PLASTIC